• Voltage Detectors
  • Voltage Regulators
  • Load Switch
  • DC/DC Converters
  • Charge Pump ICs
  • Battery Charge IC
  • Temperature Sensors
  • Hall IC (Magnetic Sensor)
  • Power MOSFETs
  • Op Amps
  • Low Noise Amplifier
  • CMOS Logic
  • Oscillator IC
  • PLL Clock Generator ICs
  • Schottky Barrier Diode
  • Transient Voltage Suppressor (TVS)
  • Packaging information,Package Power Dissipation
  • Discontinued Products/End of Life Plan
  • Reflow Soldering Temperature
Application Notes/ Tips
DC/DC Simulation

HOME > PRODUCTS LINEUP > Oscillators　> XC2165

PRODUCT DETAIL

XC2165
ICs for use with low voltage Crystal Oscillators

Datasheet

General Description

The XC2165 series are CMOS ICs operates from supply voltage range from 1.5V to 3.6V with built-in crystal oscillator and divider circuits.Output is selectable from any one of the following values for f0 : f0/1, f0/2, f0/4, f0/8.
With oscillation capacitors and a feedback resistor built-in, it is possible to configure a stable fundamental oscillator using only an external crystal.
In stand-by mode, oscillation stops completely and output pin Q0 becomes in the state of high impedance.
The XC2165 series are integrated into SOT-26 packages.
The series is also available in chip form.

Features

Oscillation Frequency C2xA series=8MHz~70MHz(Fndamental)
C2xB series=16MHz~120MHz(Fundamental)
Divider Ratio Selectable from f0/1, f0/2, f0/4, f0/8
Output 3 state
Operating Voltage Range 1.5V~3.6V(C21B series:1.8V~3.6V)
Low Current Consumption Stand-by function included
30μA(MAX.)when stand-by
Chip Form Chip siza 800x1200μm
Package SOT-26
back to top